 Â
Â
KNS GEN 2 ZOMBIE GREEN
Stainless steel pins.
Special anti-creep retainers prevent wear on your irreplaceable receiver.
Pin installation tool & 2 Torx wrenches included.
No modification to firearm required during installation.
IMPORTANT NOTE:
The external width of some AR receivers may vary in the  trigger/hammer pin area depending on the manufacturer. These pins may be  shortened a small amount by carefully filing material evenly from both  ends of the pins, but being too long will not affect the function or  performance.
The maximum torque Spec on the screw is 11 inch/lbs. (Over-torquing the screws can cause damage to these sideplates)
**There is no strength difference between the Gen 2 and Gen 2 Mod 2 sideplates. The only difference is appearance.
Details:
Ordinary trigger and hammer pins have been known to come loose and  cause wear in and around the holes, especially on full-auto weapons. If  you have this problem and is looking for a solution, this irreparable  damage can be easily avoided with the KNS Precision Generation 2  Non-Rotating Trigger and Hammer Pins.
This KNS Gen2 anti-walk pins uses two external retainers to bolt the  pins in place and avoid any movement whatsoever. In fact, these .154  diameter pins undergo an extensive hardening process to withstand the  stresses of full-auto or rapid semi-auto fire.
Appreciatively, no irreversible modifications to the receiver are  required for installation, so there’s no need to worry about adversely  impacting the resale value of your rifle if you are planning to do  so.  Also, as an added bonus, this kit reduces the play sometimes found  in match-grade triggers. So if you are in the market for something that  will hold the trigger and hammer pins down, go ahead and order yourself  the KNS Precision Gen2 .154 Non-Rotating Trigger & Hammer Pins.
