AUTHENTIC
Strike Industries
For GLOCK
Gun Universal (Optics) Mount for Glock
For Frame models like 17,19,22,23 etc
NOT FOR SMALL FRAME 42 or 43 or MOS models
(NO OPTICS, guns, or any other items included, just provide your own, this is for the GUM Mount as stated. )
Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock.
It has one of the lowest bore axises in the industry without the hassle and cost of cutting your slide!
We have put many hours and 1000’s of rounds down range with most of the more popular red dot optics on the market with no problems what so ever!
Tested optics that fit the GUM:
Burris* fast* fire* II & III
, Leupold*
delta point* reflex sights,
Docters* II & III,
EoTech* (MRDS*),
Trijicon* RMR*
Vortex Venom Red Dot sights
Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
The mount itself is secured to the slide viva the dove tail with 6 set screws.
Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift.
This provides a steady sturdy and rugged mount that will hold your zero.
Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there
. (Depending on what optic you have you will need to find the screws to correlates with your particular optic.
There are two special screws for Trijicon RMR.
Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic,
go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.
Disclaimer- You may mark your slide when using this mount to properly secure the mount.
WE STRONGLY RECOMMEND you have a qualified GLOCK Armor or Glock gunsmith install the GUM utilize the correct tools for installation. Warranty is voided for improper self installation
UPDATE: We have confirmed compatibility with Vortex Venom Red Dot sights
Trademark* belongs to its manufacturer
ALL ITEMS SHOULD BE INSTALLED BY A LICENSED GLOCK GUNSMITH.
There are no refunds on parts especially when installed by an inexperienced installer.
